Quick specs:

Tarp wt:
332g | 11.7 oz
Packaged wt:
381g | 13.6 oz

Pairs well with:

- Y-zip Bug Bivy
- 1P Bug Shelter
Get the bundled Double Wall System

NOTE: Closeout Cirriforms are available here. They had too much coating applied and are heavier than stock.

Description

The 1P Cirriform Tarp - a lightweight tarp shelter for hikers on the move

The Cirriform is for hikers who want to spend most of their day, well, hiking. Whether you're a seasoned ultralight tarp camper or making the jump from a freestanding tent, it delivers solid weather protection and an intuitive setup. With multiple inner options to adapt to your needs and the season, the Cirriform pitches fast, packs small, and holds its shape when the weather gets rough. It's the shelter we reach for on high-mileage days when the weather is unpredictable, and setup needs to be automatic and adaptable.

Full-coverage tarp
Front and rear beaks for dependable weather protection
Dual-entry
Side access for everyday use, front access when conditions call for it
Taut pitch
Aggressive curvature and a low profile keep it taut through the night
Compact footprint
Fits tight campsites while maintaining coverage
Recycled materials
Tarp fabric, thread, and select webbing are made from recycled materials
Trail weight
332g (11.7oz) for the tarp and 381g (13.6 oz) all in

Performance

The shaped geometry and Silpoly fabric work together to keep the pitch taut through the night. Silpoly resists sagging when wet, so you're not re-tensioning at 3am. The curvature handles wind and sheds rain without requiring a perfectly flat campsite. When bugs or condensation are a factor, pair it with one of our inners to run it as a full double-wall setup.

Dual Entry

The Cirriform has two entry points, and each has a purpose. The side entry is the everyday option - easy to get in and out, and on clear nights, we love rolling it back for a view of the stars. Use the front entry to keep the sleeping area covered when weather moves in. Switching between them is as simple as moving a clip.

Pair it with an inner

The Cirriform pairs with a bivy, net-tent, or floor to create a modular double-wall shelter you can adapt to the season and conditions. We make three inners designed for it: the Y-zip Bug Bivy, the 1P Bug Shelter, and the Tub Floor. Most other brands' inners will work too. The Cirriform DW bundles the tarp with the Bug Bivy or Bug Shelter at a discount.

Trekking pole supported

Pitches with your trekking poles or tent poles. The Cirriform accommodates front poles from about 37" to 44" (94-115 cm). Poles of 26"-33" (66-84 cm) are best for the foot end, though longer poles can be adapted.

Optional pole sets are available for those who prefer to travel without trekking poles.

Notes/FAQ:

Do I need a groundsheet or inner? That's up to you, but if you're not using an inner, you'll probably want to use a groundsheet or floor.
Do I need to seal the seams? Tarp seams should be sealed using a sealer for silicone coated fabrics (we recommend Seam Grip +SIL by Gear Aid). Optional seam sealing service available.

Made in Vietnam and field-tested in Montana

Specifications

Cirriform Specifications

Weight

Tarp: 332g | 11.7 oz

Tarp: 332.2g | 11.7 oz
Rigging: 43.9g | 1.55 oz
Stuff sack: 9.3g | 0.33 oz
Total: 381g | 13.6 oz

Rigging Breakdown

Reflective guyline: 28.1g | 0.99 oz
Fastline Clip (1): 3.4g | 0.12 oz
Tensionlock Tensioners (9): 10.2g | 0.36 oz
Guyline Grommet (1): 2.2g | 0.08 oz

Recycled, 20D Silpoly

The Recycled 20D Silpoly fabric uses a silicone-based coating on both sides. Silpoly absorbs less water than silnylon, reducing surprise weight, while lower sag ensures the tarp stays taut through the night.

- Weight: 40-41 gsm | ~1.2 - oz/yd²
- Hydrostatic Head: ~1800mm
- Outer face coating: Silicone-based
- Inner face coating: Silicone-based
- PFAS Free: Yes

Seam sealing: Due to the silicone coating, the seams cannot be taped and need to be manually sealed with seam sealer. You can do this yourself or use our seam-sealing service. Seam sealer is available here, and more information can be found on our Seam Sealing page.

Dimensions

Approximate Packed size (folded):
10" x 7.5" x 2" | 25.5cm x 19cm x 5cm
Approximate Packed size (full squish):
7" Long x 4" Diam. | 18cm Long x 10cm Diam.

Overall tarp dimensions for various pitches:

Click to enlarge

Hang loops

Hang loops for suspending inners are placed under each apex and near the corners. When pitched low, the loops help keep floating tub floors elevated - just run the corner lines through the loops before clipping to the tarp.

Required items (not included):

Front Pole: About 44" - 45" (~111 - 114 cm) if pairing with the Bug Shelter or 39" - 42" (~99 - 107cm) if pairing with the Bivy
Rear Pole: At least 31" (~79cm) if pairing with the Bug Shelter or at least 26" (~66cm) if pairing with the Bivy
Stakes: 6 (8 for better wind stability)

Pitching

How to pitch the Cirrifrom

Start by staking out the corners of the tarp to establish your base. Raise the poles at the peaks and stake them to form the shelter's shape. Adjust and tension the lines evenly for a tight, balanced pitch.

Download our PDF pitching guide here:

Tarps

7' x 9' Flat Tarp

2P Cirriform Tarp

9'/7' Tapered Tarp

7'/5' x 9' Tapered Tarp

1P Cirriform Tarp

8'/6' Tapered Tarp

6' x 9' Flat Tarp